The device?is still?treated by?split?type,?its appearance and?the same?50KW?machine,?80KW machinewas?shorter?than that of.

Compared with the?50KW machine,?he used the IGBTchip?80KW?to meet,?so the?power?of the device isavailable from?50-80?according to the user?control.This?is the?characteristics and advantages?of the machine.

Its stable performance,?fast heating speed,?more suitable for?multi workpiece?using multiple?types ofheating?manufacturers.?The price is?very?reasonable.

The device?has been tested?shaft?surface quenching,quenching?and?spline shaft?gear?ring?quenching?etc,the device?for?quenching can?perfect work.?The following?is the?equipment test:

Model WH-VI-60?high frequency furnace?shaft?surface quenching:

In the treatment of?the shaft surface?quenchingtemperature instantly,?up to 800 degrees,?and its mode of operation is?from top to bottom,?a?heating forming,?heating?speed is very fast.

Model WH-VI-60?high frequency?quenching?furnacespline shaft:

Gear?quenching?spline shaft,?can make its?wear-resisting degree?increased,?the service life is enhanced.

Model WH-VI-60?high frequency furnace?gearperipheral?quenching:

From the color?can be seen on the?matching?of?gearheating?of the device,?easy?it?need heating?part?dored,?but?no damage to?any other?site.?Effect is obvious.

5 0KW?machine?as a small?equipment,?in order to?simple operation,?so the?assignment is?split?form.?On one side is the?regulating?button?indicator?device.?The other part is?as a working?part,?do?sensor?heating?interface.

Compared to the?30KW machine,?50KW?equipment?is not so?easy,range and?advantages?but?heat treatment?and?expanded a lot,induction?good?metals,?such as iron,?800?degree only?takes a few seconds?to?aluminum?heating.

So the?model WH-VI-50?high frequency furnace?often?biggerrivet?diathermy,?small?big gear ring?heating?work:

Large?rivet?diathermy:

Large?rivet?heating?field

?

Henan Chao?Feng electrical?50KW?high-frequency machine?advantages

Power saving:?than the?electron tube?power 30%,?than frequency?power?SCR?20%.

2,?stable performance,?full protection,?no worries.

3,?heating speed,?no oxidation?layer,?small deformation.

4,?small volume,?light weight,?convenient installation.

The 5,?sensor isolation by transformer,?safety.

6,?environmental protection:?no?pollution,?noise and dust.

7,?strong adaptability?to?various:?workpiece heating.

8,?the temperature?and the heating time?can be controlled accurately,?high machining quality.

Main?application: this?type?is especially suitable for the?heating?field of forging,?high strength bolt,?nut?diathermy forging.?General parts?diathermy forging?and all kinds of?automobile,?motorcycle parts?need?diathermy forging,?also?can be used forsmall parts?of the?quenching,?annealing.

Model /?configuration 50

The working power?three-phase?380V/50HZ

Working voltage 342V-430V

The maximum input?current 75A?bus

The maximum output?current of 50KVA

The oscillation frequency?of 15-35KHZ

The efficiency of 90%

Load sustained rate of 100%

The cooling?water flow rate 20Lmin?(0.1mp)

Cooling water pressure?0.1-0.3mp

Host weight?55kg

The weight of?35kg?transformer

Machine dimension?590*450*780

Transformer?size?420*335/450

The host?color?blue?/ white

Transformer?color?blue?/ white

Special?applications?standard?hot?pier,?gear quenching

The water temperature?at 50?℃?protection