WH-VI-16 high frequency furnace

High frequency furnace?of the use of 30KW?and 16KW high frequency?furnace?shell?in?the same machine,?industrial?blue tones,?paint does not?touch ash,?easy?cleaning and maintenance.

The?equipment panel?is easy to operate,?a?display?with?time?and temperature sensing.?Can be more?direct?control,?switch?in front.?Regulation?only?operation according to the?Henan superFeng?electrical manual?debugging,?simple,?a school will.

30KW?high frequency furnace?used for?screw?heating,?the small gear?shaft?heating,?quenching?and so on,?the heating?effect is stable,?bring a lot of?benefits to the customer,?and the priceis low,?many?manufacturers.

Model WH-VI-30?high frequency furnace?screw?heating:：

30KW high frequency furnace screw heating

The device?for a second?heating can be?a?screw,greatly enhance the?work efficiency.

Model WH-VI-30?high frequency furnace?pinion?and?shaftquenching?diagram:

The small gear shaft frequency quenching

Characteristics of?induction coil,?let the?quenching?is more uniform,?faster.?It only takes a few?seconds to complete theheating.

36KW?high frequency welding machine?ultra?high frequency?application range?front?|?inductionwelding?machine:

Supply?good?quality?high-frequency welding machinesuper?Feng card?various turning?welding?weldingwelding,?milling,?planing,?all kinds of woodworking tool?welding,?various bits of?welding,?such as:geological drill,?bit of oil,?coal?bit?welding,?can also be used for the?shearer?ruler?welding,?cuttingruler?excavator?welding,?welding?of diamond saw blade,?hard alloy saw blade,?cutting tool?welding,application scope is quite widespread,?welcome?tovisit our company?needs.

The main?characteristics of the welding?machine?36KWHenan Chao?Feng electrical equipment?limited company:?high frequency?power?tools:?than theelectron tube?power 30%,?than?the thyristor medium frequency?power 20%.?stable performance:?complete protection,?no worries.?Fast heating speed:?without oxidation layer,?small deformation.?After welding,exquisite appearance,?uniform heating,?so there is no?lack of?welding?and leakage?solder joints.?Our company?is an old?enterprise do?high-frequencywelding,?with rich experience,?more than 20 years ofadvanced technology,?equipment?can be assured use.

Model /?configuration 36

The working power?three-phase?380V/50HZ

Working voltage 342V-430V

The maximum input?current 55A?bus

The maximum output?current of 30KVA

The oscillation frequency?of 15-45KHZ

The efficiency of 90%

Load sustained rate of 100%

The cooling?water flow rate 15Lmin?(0.1mp)

Cooling water pressure?0.1-0.3mp

Host weight?45Kg

Transformer weight

Machine dimension?580*280*510

Transformer?size

The host?color?blue?/ white

Transformer?color

Special?application field?drill rod?diathermy,?bitwelded small?shaft

The water temperature?at 50?℃?protection